power supplies

Transformers

Home
/
Power Supply

IMPACT LIGHTING INC’S CLASS2 MAGNETIC DIMMABLE TRANSFORMERS

IMPACT LIGHTING INC’S Magnetic Transformers are built especially for LED systems. They provide the following benefits:

LED Magnetic Transformers have no minimum load requirements. They cause no flicker or any of the other side effects that can result from a lack of synchronization between voltage mode drivers and PWM low voltage drivers in the light fitting.

Perfect Dimming - IMPACT LIGHTING INC’S Magnetic Transformers are fully compatible with low voltage dimmers, in contrast to voltage mode drivers that balance the voltage in the system and prevent the dimmer from working.

Lower power consumption - IMPACT LIGHTING INC’S Magnetic Transformers bring about an improvement in efficiency of 15%, due to the avoidance of unnecessary double conversion in the circuitry.

No RFI issues - IMPACT LIGHTING INC’S Magnetic Transformers operate at a perfect 60Hz sinus wave and so produce no radio frequency interference whatsoever.

Compact Size - IMPACT LIGHTING INC’S Magnetic Transformers are much smaller than standard magnetic transformers, use less power - working on outputs as small as 15W - and can even be placed inside lighting fixtures.

Download PDF Specification

CLASS 2 SINGLE OUTPUT SWITCHING POWER SUPPLY

- CONSTANT CURRENT MODE POWER SUPPLY
- UNIVERSAL AC INPUT / FULL RANGE
- EPOXY ENCAPSULATED WITH IP67 LEVEL
- WITHSTAND 300VAC SURGE INPUT FOR 5 SECONDS
- PROTECTIONS: SHORT CIRCUIT / OVER CURRENT / OVER VOLTAGE
- FULLY ISOLATED PLASTIC CASE
- COOLING BY FREE AIR CONVECTION
- SMALL AND COMPACT SIZE
- UL1310 CLASS 2 POWER UNIT
- 100% FULL LOAD BURN-IN TEST
- LOW COST, HIGH RELIABILITY
- SUITABLE FOR LED LIGHTING AND MOVING SIGN APPLICATIONS
- 2 YEARS WARRANTY

ITEM#:
IL-40W-PS-C2
IL-45W-PS-C2
IL-60W-PS-C2
IL-80W-PS-C2
IL-100W-PS-C2

Download PDF Specification

300W 12V/25A SINGLE OUTPUT POWER SUPPLY

FEATURES:
- 300W, 12V/25A
- HIGH RELIABILITY, LOW COST
- BUILT IN FAN SPEED CONTROL
- 100% FULL LOAD BURN-IN TEST
- PROTECTIONS: OVER CURRENT/ OVER VOLTAGE/ OVER TEMPERATURE/ SHORT CIRCUIT
- 1 YEAR WARRANTY
- DIMENSIONS: 9.64 X 4.96 X 2.6”

SPECIFICATIONS:
- AC INPUT VOLTAGE RANGE: 90-130VAC
- INPUT FREQUENCY: 47-63HZ
- INRUSH CURRENT: COLD START, 40A
- INPUT LEAKAGE CURRENT: <0.7MA
- LINE REGULATION (FULL LOAD): <±0.5%
- OUTPUT VOLTAGE ADJUST RANGE: ±10%
- OUTPUT OVER CURRENT PROTECTION: 110-130%, CURRENT LIMITING, AUTO RECOVERY
- OUTPUT OVER VOLTAGE PROTECTION: 115-150%
- WITHSTAND VOLTAGE: I/P-O/P: 1.5KVAC/1MIN: O/P-F/G: 0.5KVAC/1MIN
- RISE, HOLD UP TIME: 50MS, 20MS@FULL LOAD (TYPICAL)
- OPERATING TEMP. & HUMIDITY: -10°C/+50°C, 20%-93%RH (NON-CONDENSING)
- STORAGE TEMP & HUMIDITY: -20°C/+85°C, 20%-95%RH (NON-CONDENSING)
- COOLING METHOD: FAN

Download PDF Specification